Orifice Flanges

किंमत आणि प्रमाण

• किमान ऑर्डरची मात्रा 100

उत्पादन तपशील

• वजन Varies with size and rating (e.g., ranges from 4 kg to 120 kg or more)
• पुनर्वापरयोग्य Yes
• पृष्ठभाग Machined finish, raised face (RF) or ring type joint (RTJ)
• साहित्य रचना% Varies by grade; typically: Carbon Steel (C ≤ 0.26%, Mn ≤ 1.2%, Si ≤ 0.6%), F316 (~16-18% Cr, 10-14% Ni, 2-3% Mo)
• वापर Measurement of fluid flow in conjunction with orifice plates
• उष्णता प्रतिकार Yes
• लेप प्रकार Antirust oil, galvanized or custom coating on request for carbon steel
• जाडी As per size and pressure class; refer to standard or technical drawing
• आकारमान (एल* प* एच) Standard as per ASME/ANSI B16.36; varies by size and rating; refer to engineering drawing
• आकार 1/2” NB to 24” NB and above, as per specification
• रंग Metallic, may be black (carbon steel) or silver (stainless steel)
• उत्पादन फॉर्म Forged flange component
• तन्य शक्ती Min 485 MPa (ASTM A105), 515 MPa (A182 F316)
• समाप्त प्रकार Machined, smooth or serrated finish on faces
• साहित्य ग्रेड ASTM A105, ASTM A182 F316, ASTM A182 F304, or as specified
• रचना Fe-base alloy; specific alloying elements depend on grade selected
• गंज प्रतिरोधक Yes, especially in stainless steel grades
• व्यास Ranges from 1/2 to 24 nominal bore (NB) or as per requirement
• कडकपणा Max 187 HBW (ASTM A105), 217 HBW (A182 F316)
• ग्रेड ASTM A105, A182 F304, A182 F316, A350 LF2 or as specified

• Testing 100% visual inspected, hydrostatic tested as per standards
• Pressure Rating Class 150, 300, 600, 900, 1500 & 2500 as per ASME/ANSI
• Temperature Range -29°C to +425°C for CS, up to 800°C for SS (material dependent)
• Assembly Features Jack screw holes provided, tapping for pressure connections as per standard
• End Connection Flanged ends for bolted connection
• Compliance Conforms to ASME/ANSI B16.36, B16.5, ASTM standards, PED on request
• Leakage Class As per piping class and gasket selected
• Marking Marked with pressure class, size, heat number, material grade and manufacturer logo
• Connection Type Flanged — raised face (RF) or ring type joint (RTJ)
• Face Type Raised Face (RF) or Ring Type Joint (RTJ)
• Drilling Standard Bolt holes drilled as per ASME/ANSI B16.5
• Orifice Plate Inclusion Supplied with or without orifice plate and jack screws per specification

व्यापार माहिती

• पुरवठा क्षमता प्रति दिवस
• वितरण वेळ आठवडा